Winnerwell® Flashing Kit Large       Patented Design
 

Designed to fit perfectly with the Winnerwell® Triple-wall Heat Protector Chimney 3.5"，Winnerwell® Triple-wall Heat Protector Chimney for External Air M-sized Stove, the Winnerwell® Flashing Kit Large is made from silicone which resists the temperature of 240℃ and is held in place by stainless steel rings with six wing nuts. This Flashing Kit Large can be used to create a weather-tight seal on existing stove jacks or when installing a stove jack in a tent or shelter.  


WARNING: The Flashing Kit must be used with Winnerwell® Triple-wall Heat Protector Chimney 3.5"，Winnerwell® Triple-wall Heat Protector Chimney for External Air M-sized Stove. There is a risk of melting if install the Flashing Kit on stove pipe directly.



Specification
Material: Silicone collar + AISI304 Stainless Steel rings
Inner Diameter: 150mm / 5.9in
Outer Diameter: 260mm / 10.2in
Height: 112mm / 4.4in  
Net Weight: 0.6kg / 1.3lbs

Winnerwell® Flashing Kit must be installed at the position below the 5th row of the holes of the Winnerwell® Heat Protector Chimney. If there’s an installation angle, please must make sure that any position of the Silicone part of the Winnerwell® Flashing Kit must below the 5th row of these holes as well. We recommend to purchase Winnerwell® Short Pipes separately for height adjustment to meet the above specified position requirement.

WARNING: Temperature at the top part of the Heat Protector Chimney is high, the Silicone part must avoid the position of the upper cooling holes.